Last Updated on October 8, 2018

Limit WiFi Speed Benefits

If you are on this page and reading this line. It means, you already aware that. Why you are going to Limit Wifi Speed? for this reason, To limit Wifi Speed provide you many advantages. For example, it gives limited connectivity to users. Further, there are many users. Who download all the time. Such as downloading movies and games. So, these media have a large capacity. Therefore, it will down all the speed for other users on the same connection.

Similarly, to limit wifi speed control each individual. Therefore, other users will not affect by anyone’s downloading. Therefore, You should learn how to limit wifi Speed on your own.

Limit WiFi Speed With Mac or IP?

There are two methods to limit wifi Speed. First, you can limit with Mac Address. Secondly, You can also limit wifi with IP Address. However, the best option is to limit wifi speed with Mac address.

Mac address Filter

Mac address is a physical address. Therefore, each device which has wifi. That device is Mac address. Further, every device has a unique Mac address. Therefore you not change and alter mac address. But there is some method where you can change Mac Address. It may be temporary. For this reason, when you are going to limit wifi with mac address. Then no one will be able to bypass from the connection. It means Mac address filter is stronger then IP Address.

1. How to Find your Mac Address?

If you want to know about your device’s mac address. You can follow this simple steps in computer and laptop.

Step 1. Open CMD:

Step 2. CMD is command prompt. Where you can write different command. And the computer will follow command the instructions. Since we are going to check out, what is the Mac address of a computer?

Step 3. Click on Start Menu and write CMD.

Step 4. A black screen will appear. Next, you are going to write ipconfig/all.

There you will find different details. The one which you are going to find it is Physical Address.

IP Address Filter

Internet Protocol (IP) is a number which every router and internet connected devices has. When you are going to connect with the internet. Then the specific router will assign IP for your computer or laptop. Same is with all other devices. Including mobile phones and tablet etc. Therefore, you can also assign different speed limiting role to computer or laptop. Since anyone can change IP address with simple steps. Therefore, it is not considered as strong as Mac Address.

2. How to find IP Address?

Step 1. You are going to attempt the same operation. Click on Start Menu.

Step 2. Write CMD.

Step 3. next, You are going to write ipconfig in Command Prompt.

Universal Step to Limit WiFi Speed

There are many companies out there. All have the different configurations. Where you can change the various setting. However, there some similar steps which look like this steps.

1. Go to the browser and write the IP address of your router. However, you can find the IP address of your router on the back of the router. It looks like 192.168.x.x
2. Login to Your Router. Here you will find two input. First for User Name. Second for Password. Both username and password is also on the back of your router.
3. Get all the IPs from the active client table. However, Active client table is the area where all are connected to your internet. And you can get the IP address of all these users.
4. Go to Bandwidth setting.
5. Submit the IP or Mac address for limiting the wifi speed
6. Save.

How to Limit WiFi Speed on PTCL

PTCL is Pakistan Tele Communication Limited. Moreover, PTCL is one of the largest internet provider in Pakistan. Therefore, most of the people use it at home and office. for this reason, there are many users who want to limit internet wifi speed. So, Here you will find out how to limit wifi speed in PTCL router.

Step 1. Go to your Browser and write the IP Address on your router. You can find the IP address by checking that on the back of your PTCL router. For my Case, it is 192.168.10.1

Step2. Further, the login Screen will display in front of you. You need User Name and Password. Since you don’t know about the username and password. Therefore, you can find that in the back of the router as well.

Enter correctly both User and Password and Press ok

Step 3. As a result, you will send to PTCL config page. In due time, you will see the Advanced button on the right-hand side. Click on it.

Step 4. In like manner, you can see more menu and option. But, first, we have to find out the IP and Mac address of the users. For this reason, Follow the step below.

• Click on Device Info.
• On submenu click on DHCP. Here you will find all the Hostname, Mac Address, and IP Address.
• Therefore, you can check all the devices which are connected to your router.

Step 5. Now you have to find out your IP. Which I have Explained Below. And remember what is your IP Address.

Step 6. In this step, you are going to limit wifi Speed for all other users. Therefore, follow these steps.

• Click on Advanced Setup.
• Further, you will find Bandwidth Control. Click on it.
• Here you will find some information. For example.
  • Description, Where you can write anything. But remember, don’t give space in between two words.
  • IP Address Range. Here you can assign the IP address to the group which you want to limit Wifi Speed.
  • Max Upstream Speed (Kbps). Here you should enter the number. That how much specific range of user should upload date on the internet.
  • Max Downstream Speed (kbps). Here you are going to enter the number. That how much downloading should specific range of user allow?

As you are going to decrease the wifi speed for other. Therefore, you have to make two rules. One, for your IP, makes write-in Max Upstream Speed and Max Downstream Speed high number. However, you are going to make the second role. Where you are going to enter Upstream and Downstream as much as you want for all other users.

Note: When you are going to write in the IP range only one IP.  Write the end number same the first one. For example 192.168.10.20 – 20. In the second box, you have to write 20 too. Therefore, It only counts a single range of IP address which is 192.168.10.20.

Finally, everything is done. You have to press Save and Restart the router. So, that’s it. You have successfully limit Wifi Speed for all users.

How to Limit WiFi Speed on Digisol Router

Digisol is Wifi Router. It is widely used in different countries. Moreover, It is a portable and very simple router. Therefore, most of the people use it for home and office. However, If you want to limit wifi speed on the Digisol router. Check the following steps to configure the router.

Step 1. On your browser, In address bar write 192.168.2.1.

Step 2. Moreover, the login page will open. Here you have to write Username and Password. However, if you never change the password. Then there are high chances that Username is admin and the Password is admin or 1234. Further, Entering the username and password. Press Login.

Step 3. Go to Status > Active Client Table.

Step 4. Here you will find the List of the active client with IP and Mac Addresses. Further, check out which IP Address. You are going to limit wifi speed.

Step 6. In addition, You will go to  Advanced and Select QoS Setup. Further, you are going to add the values. Therefore, Click on Add. Similarly, you will find many options here. For example.

Protocol	Source netMask
Source IP	Dest NetMask
The Dest IP	Dest Port
Source Port	Up Celling
Up Floor	Down Ceiling

Step 7. As you have already noted the IP address which you are going to block. therefore, Enter that in Source IP. Now put all values 200 On Up Floor, Down Floor, Up Celling and Down Celling.

Step 8. In effect, let all other values Blank. Finally, click on Add.

Step 9. With this in mind, now you have to restart the router. You have successfully limited wifi speed.

Note: If you want to limit everyone in Digisol Router. For this reason, you have to apply the range of IP addresses. For example, If you are want to limit 10 devices at the same time. You should write in Source IP 192.168.2.2 and in Dest IP you must write 192.168.2.11. It means you have applied a limit on all device from 2 to 11. Further, you can assign your IP address on number or bandwidth. while writing on all selection.

How to Limit Wifi Speed on Tenda Router?

Tenda is a wifi router. Therefore, make Tenda as a getaway and distribute your internet connection. However, Tenda is one of the most papular Wifi router. Therefore, many people use Tenda in their home and office. It means, giving connect to others will make your internet slow. But, the best part is that you can limit wifi speed in the Tenda router.

For this reason, check out all the following steps to limit wifi speed in Tenda router.

Step 1. Go to your browser and write 192.168.0.1 on the address bar. Further, Login screen will apear. Moreover, you can find the Username and Password from the back on the

router.

 

Step 2. Here you will find the different buttons on the menu bar. click on Advanced. Further, here you will get more option on the left-hand side.

Step 3. On the left-hand side, there is an option for DHCP Client List. As can be seen, this is the option. Where you can find all the IP Addresses. Further, Note down the IP address on which you are going to limit.

Step 4. Similarly, On the top menu, you can see QoS. Click on QoS. When QoS page will open. On the left-hand side you will find Bandwidth Control. Click on it.

Step 5. Moreover, you should activate the Bandwidth Control. For that, check Enable.

Step 6. Further, you will get many fields. Likewise,

• IP Address. You have to enter the IP addresses on which you are going to assign limitation.
• Upload/Download. Here you can select from drop-down menu either you are going to select Upload or download option.
• Bandwidth Range. Here you are going to assign, how much speed you are going to give.

Step 7. Finally, click on Add to List and click on OK.

Congratulation, you have successfully configured Tenda router.

How to Limit WiFi Speed on iBall Router?

Likewise, all another Wifi router. iBall is also one of the best routers. Further, iBall has all functionality which any router required. Moreove, it is an important part of the router that it must have the limit on wifi speed. In addition, to see how to configure and limit wifi speed. Follow the steps below.

Steps to limit Wifi Speed on iBall

Step 1. Go to your browser. Further, write in your browser 192.168.1.1

Step 2. The login screen will display in front of you. Further, you have to write Username and Password. If you have not changed the username and password. Then the default username an password is “admin”.

Step 3. In addition, you have to find out the Active Client List. For that, you have to go to DHCP. Further, you can get DHCP Client List. So, you can find all the IP addresses which you want limit wifi speed.

Step 4. With this in mind, You must apply to limit wifi speed to the user. For that, you have to go to Bandwidth Control. Further, Enabled IP QoS.

Step 5. Moreover, you will get IP range. you have to enter all IP Addresses which you have selected from DHCP Client List. In like manner, Mode to Maximum Bandwidth Limit. Further, in the bandwidth field enter the Bandwith Limit which you want to give to the user.

Step 6. As a result, give a name in the Description field and check the Enable in front of it.

Step 7. Finally, save the setting and restart the router.

At last, you have successfully applied a limit on the specific user in your router. And enable your Internet connection with more bandwidth. Good Job!

How to Limit WiFi Speed on D-Link Router?

D-Link Corporation is a Taiwanese multinational networking equipment manufacturing corporation headquartered in Taipei, Taiwan. D-Link is papular for its devices. Therefore, it wifi router is also one of the choices of many internet users. However, we are going to see how to configure and limit wifi speed on the D-Link router. Follow these to setup D-Link router with ease.

Step 1. For the configuration of D-link Router. First, you have to go to your browser. second, you should enter the IP Address of D-Link 192.168.0.1.

Step 2. When you are going to browse the configuration page. Further, you will see the login page. Therefore, you are going to log in on your D-Link router. for that reason, you have to check at the back of your router. Where you can easily find Username and Password. Enter Username and password and login to the admin area.

Step 3. At the same time, you can see at the top menu Status button. Click on it. further, on the left-hand side, you will find Client Table. This is the area where you can get all the list of Active Users. Moreover, get all the IP addresses which you want to limit.

Step 4. Next, you have to go to the top menu bar. Further, you will find the Advanced menu. click on it. On the left-hand side, There is a button for Traffic Control. Click on it.

Step 5. Similarly, You have to click on Add. Further, you will get some more option to fill it out.

• Source IP. In this area, you have to enter the IP address which you want to assign limit.
• Up Floor. In this area, you going to write the number. How much you are going to limit the user. Write the value in this box.
• Down Floor. Write the similar number as up floor.
• Up Celling and Down Celling. Write the same value as you have written from two other value.

Step 6. Finally, click on Add Rules and restart the router.

You have successfully applied to limit wifi speed on D-Link router.

How to Limit WiFi Speed on TP-Link Router?

In like manner, TP-Link router is a device for wifi connection. Therefore, you can use TP-Link and connect all your device with the internet. Further, TP-Link is a Chinese manufacturer of computer networking products based in Shenzhen, Guangdong, China. It is a Chinese product. But if we are going to talk about it reliability. I strongly believe that it is one of the best product out there.

However, we are going to find how to limit wifi speed on TP-Link router. Follow these steps to configure you TP-Link router.

Step 1. Enter 192.168.0.1 on your browser.

Step 2. Further, the login screen will display. Now you have to enter the Username and Password. However, you can find your username and password to the back of the router.

Step 3. To find all the list of users connects to your TP-Link router. You have to click on DHCP > DHCP Client List. This is the area where you will find all the active user connect to your router or internet.

Step 4. Similarly, choice the IP address which you want to apply the limit. And if you want to limit all user. Just apply the complete range of IP addresses.

Step 5. Next, go to Bandwidth Control. There you will find the Rule List. click on it.

Step 6. Here you will find the button Add New. Further, you will get all the details. You need to fill all the details.

• IP Range. You have to write the IP address on the user which you want to limit wifi speed.
• Port Range. Let the field blank.
• Product. Select All.
• Egress Bandwidth. You have to write a number which you want to limit the user.
• Ingress Bandwidth. Same value will be applied as Egress Bandwidth.

Step 7. Finally, click on Save and you are done. Further, restart the router.

SelfishNet For Windows 10

SelfishNet is one of the best software to limit wifi speed using Windows 10. However, if you don’t have access to the router. Or you have an actual user and using someone else internet. Then probably you don’t have access to the admin area of the router. Don’ worry Still you can limit wifi speed using your computer or laptop. Just follow these simple steps and limit internet for everyone. 

Step 1. First, you have to download the software from the link below.

Download

Password = professionaltutorial.com

Step 2. Second, you are going to install the software. and after installation. Further, you have to open it will Administrative Permission. Otherwise, it will not work. For that, you have to right click on exe file and you will see the option.

Step 3. Further, a window will appear. Here you will see the NIC selection. Just Press on OK.

Step 4. On the top, you will the Icon of a camera. When you are going to press on it. All network will appear.

Step 5. Next, you are going to select. The Electric Charge icon. Which will show you live downloading and uploading of particular machine.

 

Step 6. Now, you are going to limit wifi speed. For that, you have to put some value on Downloading Cap and Uploading Cap. To limit both downloading and uploading.

Congratulation. You have successfully limited WiFi Speed using SelfishNet.

Conclusion:

We tried our best to include a complete series of router and software. Which is beneficial to limit wifi speed. However, if you think there is something which is missing for you want to add your feedback. Please don’t hesitate to write that in comment box Below.